Call Us Today: (403) 569-6879

URECO Products

Polyurethane High Build Systems

Ureco Logo

STS

Self-Leveling Broadcast 1/8"-1/4" Thickness
Product Quantity 63 lbs
Colours Steel Grey & Tile Red
Pot Life 15 Minutes
Dry Time 6-8 Hours FT | 8-10 Hours RC | | 8-10 Hours LT | 12-16 Hours FC
SF Or LF 36-38 SF
Area Or Depth 1/4" Thick
Floor Or Wall Floors & Walls
Interior or Exterior Interior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure

  • Odourless, non-toxic, non-tainting, no ventilation required

  • Pre-measured unit for easy handling and mixing

  • Easy application, no priming required

  • Meets Canadian Food Inspection Agency standards

  • Superior adhesion & superior chemical resistance

  • Coefficient of thermal expansion

  • Easy maintenance

  • High abrasion resistance

  • Excellent performance under thermally induced stresses such as steam cleaning

  • Thermal shock resistant, resistant to fungi and to mold growth

  • Self-extinguishing

  • Can be applied on to 7-10 days old concrete

  • This product is best suited for application in temperatures between 5º C and 30º C. Moisture content of substrate should not exceed 10%. Do not allow resins to freeze

  • URECO STS is applied using a gauge rake to required thickness at 1/8’’-3/16’’-1/4’’ inch. Back roll with spiked roller. Always pull roller towards you. URECO STS requires quartz aggregates to be full broadcast on the wet surface. Allow the system to cure, then remove any excess of quartz aggregate with broom and vaccuum