Call Us Today: (403) 569-6879

URECO Products

Polyurethane High Build Systems

Ureco Logo

FL

Polyurethane Grout System
Product Quantity 111 lbs
Colours Steel Grey & Tile Red
Pot Life 20 Minutes
Dry Time 4-6 Hours FT | 8-10 Hours RC | 12-16 Hours FC
SF Or LF 12 SF
Area Or Depth 1" Thick
Floor Or Wall Floors & Walls
Interior or Exterior Interior & Exterior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure

  • Odourless, non-toxic, non-tainting, no ventilation required

  • Pre-measured unit for easy handling and mixing

  • Easy application, all surfaces must be primed with URECO P Primer

  • Coefficient of thermal expansion similar to concrete

  • Superior adhesion

  • Allows for high fill, bulk build re-sloping or filling of large hole

  • Technology based on the other URECO flooring systems which allows for inter-coat compatibility and monolithic high build applications from substrate to surface

  • Self-extinguishing

  • Resistant to fungi and to mold growth

  • Can be applied onto 7-10 days old concrete

  • Priming is required for maximum adhesion and ease of installation. This product is best suited for application in temperatures between 5º C and 30º C. Moisture content of substrate should not exceed 10%. Do not allow resins to freeze

  • URECO FL can be applied at 1’’ (2.54cm) to 12’’ (30 cm) thickness. URECO FL must be applied over a tacky primer, allow the system to cure for 8-10 hours before application of URECO STS or URECO EG

  • EXT process: Ureco P Primer Epoxy, Ureco FL,Ureco STS, Sand, Ureco XTC UV Resistant