Call Us Today: (403) 569-6879

URECO Products

Polyurethane High Build Systems

Ureco Logo

EG

Heavy Duty Trowel Grade 1/4"-3/8" Thickness
Product Quantity 67 lbs
Colours Steel Grey & Tile Red
Pot Life 15 Minutes
Dry Time 6-8 Hours FT | 8-10 Hours RC (TC/XTC) | 8-10 Hours LT | 12-16 Hours FC
SF Or LF 22-24
Area Or Depth 1/4" Thick
Floor Or Wall Floors
Interior or Exterior Interior & Exterior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure

  • Odourless, non-toxic, non-tainting, no ventilation required

  • Pre-measured unit for easy handling and mixing

  • Easy application, no priming required

  • Co-efficient of thermal expansion similar to concrete

  • Meets Canadian Food Inspection Agency standards

  • Superior adhesion & superior chemical resistance

  • Excellent performance under thermally induced stresses such as steam cleaning

  • Easy maintenance

  • Thermal shock resistant, resistant to fungi and to mold growth

  • Self-extinguishing

  • Can be applied on to 7-10 days old concrete

  • This product is best suited for application in temperatures between 5º C and 30º C. Moisture content of substrate should not exceed 10%. Do not allow resins to freeze

  • URECO EG floor trowel grade can be applied with a steel trowel at 1/4’’ (6mm) or at 3/8’’ (9mm) thickness. URECO EG can be applied directly to the substrate and under normal circumstances require no priming or sealing

  • This product is suited for interior or exterior surfaces but must have a XTC Top coat UV resistant. You have to prime first with a Ureco Primer Epoxy under the vertical