Call Us Today: (403) 569-6879

Smith's Products

Sealers

Smith's Nature Shield

Nature Shield

Water, Oil, & Stain Repellant Penetrating Sealer
Product Quantity 1 gal
Colours Milky (Dries Clear) | Can Mix With ColorFloor
Dry Time Once Dry RC | 1 Week FC
SF Or LF 200 SF
Area Or Depth /gal
Floor Or Wall Floors & Walls
Interior or Exterior Interior & Exterior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure
HFT Heavy Foot Traffic (Forklift)
VT Vehicular Traffic
FUT Full Traffic

  • Water-based aliphatic polyurethane / flourochemical technology; sealing/priming/penetrating water, oil and stain repellent developed to both mechanically and chemically bond to a wide variety of mineral substrates including, but not limited to concrete, stucco, pavers, natural stone, clay tile (Saltillo tile), and brick

  • Primer coat / mitigates moisture transfer

  • Extends substrate life cycle

  • Reduce maintenance costs

  • User friendly

  • Low VOC

  • UV Stable

  • Minimal change in substrate appearance

  • Excellent beading for improved aesthetics

  • RECOMMENDED USE: Mineral substrates, fully cured concrete (28 days)

  • NOT RECOMMENDED FOR: Non porous, smooth troweled or previously coated substrates

  • APPLICATION METHOD: Smith’s Nature Shield may be applied via brush, push broom, roller, pump up, HVLP or airless spray

  • SPRAY APPLCATION: A typical pump up sprayer provides an easy, economical method of application. The use of an HVLP or airless sprayer is viable options for application of product. Spray on in a fine, fog pattern, without spurts or dribbles, to form a thin, continuous film. Avoid puddling in low areas. If puddles occur, brush or roll them out. Additional applications of Smith’s Nature Shield may be required to ensure substrate has achieved full saturation

  • ROLLER APPLICATION: Use a soft bristle brush push room (heavy textured substrate) or 3/8 inch non-shed roller cover. Smith’s Nature Shield can be rolled onto substrate via a dip and roll method. Material can also be poured onto the substrate and distributed. Do not allow excess puddles. If puddles occur, brush or roll them out. Additional applications of Smith’s Nature Shield may be required to ensure substrate has achieved full saturation. Roller or Brush application of Nature Shield mixed with Color Floor/Wall may achieve mechanical line

  • BRUSH APPLICATION: Utilize traditional bristle brush application for more controlled application to corners, control joints, grout lines, etc. Follow instructions for Roller Application