Smith's Products
Colours & Traction

Color Floor
Water-Based Decorative StainProduct Quantity | 1 quart | 1 gal |
Colours | Call our office for colors in stock. Special Order required for most colors. See Color Chart under Resources Tab for available colors. |
Dry Time | 15-20 Minutes DT & RC | 24 Hours FC |
SF Or LF | 250-400 SF | 1000-1600 SF |
Area Or Depth | /quart | /gal |
Floor Or Wall | Floors & Walls |
Interior or Exterior | Interior & Exterior |
TF | Tack Free |
RC | Recoat |
FT | Foot Traffic |
LT | Light Traffic |
DT | Dry Through |
FC | Full Cure |
HFT | Heavy Foot Traffic (Forklift) |
VT | Vehicular Traffic |
FUT | Full Traffic |
-
Waterborne Acrylic; Satin-Gloss
-
Water submersible, alkali, weather and UV resistant; top coat required, compatible with SB, WB, 1 & 2 component urethane, acrylic & epoxy
-
RECOMMENDED USE: cured concrete slabs (28 days) and other porous substrates, can apply over sealed surfaces
-
NOT RECOMMENDED FOR: Non-porous substrates (metal, resin, fibreglass), when submerged in water or exposed to severe weather conditions
-
Compatible with neutralized acid-based stains; with overlays as a topical stain and as integral colour
-
Low Odour, Low VOC
-
Fast Air Dry
-
See TDS for application: Can brush, sponge & spray on
-
1pt to 4pts distilled water for previously coated substrates
-
1pt to 2 pts base boost to 2 parts distilled/deionized or reverse osmosis water for concrete
-
Safety Data Sheet | SDS
Download PDFTechnical Data Sheet | TDS
Download PDFColour Chart
Download PDFVisit Smith's Website
Visit Website