Smith's Products

Overlay

Single Bag Formula Dry Mix

Product Quantity	50 lbs
Colours	White Powder (Pigment Packs Available)
Pot Life	30-60 Minutes
Dry Time	12 Hours Seal/Stain \| 12 Hours LT
SF Or LF	20-30 SF \| 75-100 SF \| 125-150 SF
Area Or Depth	1/4" to 1/2" Stamp Coat \| 1/16" to 1/8" Trowel Coat \| Spray - Knock Down Texture
Floor Or Wall	Floors & Walls
Interior or Exterior	Interior & Exterior
Hardness (Pencil)	D695
Compressive Strength (PSI)	5119
Tensile Strength (PSI)	927

Smith’s 4 in 1 Overlay is a single bag formula dry mix requiring only addition of water to produce a permanent bonding cement overlay for both interior and exterior installations. This unique mix does not require a bond coat and allows the installer to apply the product as a stamped overlay, spray texture, trowel substrate or vertical surface. Smith’s 4 in 1 Overlay is suitable for applications from vehicular traffic to residential flooring and countertops. Its heat reduction characteristics make Smith’s 4 in 1 Overlay an excellent product for pool decks and patios. Do not freeze

Water only – no more additive waste; Ultra high polymer modification; Low Odour; Multiple applications – 1 bag; Superior performance; High strength (rated for vehicle traffic); Ready to stamp immediately; Saves time and labor

Recommended Use: Designed for any non-flexible surface requiring a maximum strength cement overlay as well as a resurfacing layer over existing coatings and substrates. Not recommended for: Flexible or unstable substrates

Sealers: Do not apply Smith’s Seal WB directly over integral coloured or uncoloured Smith’s 4 in 1 Overlay as hazing may occur. Smith’s Royal Seal, Smith’s Polyurethane WB and Smith’s Polyurethane SB may be applied directly to Smith’s 4 in 1 Overlay. All Smith’s sealers can be applied over Smith’s 4 in 1 Overlay installations that have been stained with Smith’s Color Floor or Color Wall