Call Us Today: (403) 569-6879

PROSOCO Products

Protection & Maintenance

Consolideck Concrete Protector SB

Consolideck Concrete Protector SB

Solvent-Based, Low-Odour Penetrating Water, Oil & Stain Repellent
Product Quantity 1 gal | 5 gal
Colours Clear (Slightly Darkens Concrete)
Pot Life Use Immediately After Opening
Dry Time 60-90 Minutes TF | 4 Hours FC | 24 Hours Stain Resistance & Water Repellant | 7 Days Stain Resistance Improves
SF Or LF 1500-3000 SF | 2500-4000 SF | 4000-5000 SF
Area Or Depth Steel Troweled | Polished Concrete | LSGuard Or PolishGuard Treated Floors | All Rates /gal
Floor Or Wall Floors & Walls
Interior or Exterior Interior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure
  • Resists oil and food stains, and repels water and water-related stains

  • Works on floors previously treated with Consolideck® LS®, LS/CS® or Blended Densifier. May be applied to surfaces previously treated with Consolideck® LSGuard® or PolishGuard. Concrete Protector SB may be applied to existing, cured concrete of any age. New concrete should be cured for at least 28 days prior to application

  • Will not provide UV protection to concrete floors coloured with Consolideck® GemToneStain or ColorHard. Consolideck® LSGuard® or PolishGuard are more appropriate

  • Low-odour suitable for interior application to occupied buildings

  • Fast drying – reduces down time

  • Treated surfaces “breathe” – does not trap moisture

  • Can be burnished

  • Coverage rate higher than typical water repellents or other stain-resistant impregnators

  • Re-coatable; penetrates and bonds to concrete previously treated with Concrete Protector SB – no stripping required

  • Not for use on surfaces exposed to standing or pooling water. Not suitable for surfaces subjected to below grade water exposure

  • Will not compensate for structural defects or bridge cracks, gaps and voids

  • Best results: Use LS, LS/CS or Blended Densifier prior to CP SB

  • See TDS for application instructions