PROSOCO Products

Interior & Exterior Colours: Amber, Black, Blue Stone, Bronze, Brown Stone, Caribbean Blue, Concrete Grey, Desert Sand, Espresso, Georgia Clay, Graphite, Light Roast, Mocha, White

Interior Only Colours: Copper Patina, Emerald, Painted Desert, Red Rock, Rose Quartz, Serpentine, Welsh Slate

Water-based, environmentally responsible ColorHard saves time, reduces waste and eliminates hazards associated with corrosive acid stains or highly flammable solvent-reduced dyes

Many ColorHard colours are suitable for outdoor use, even in extreme climates. See Placement Chart

Layer or blend to create unlimited colour and design variations

Great for any-age trowel-finished, ground or textured concrete. May be used over integrally coloured concrete, shake-on colour hardeners, acid-stained concrete or concrete coloured with solvent-reduced dyes

VOC Compliant. Non-flammable. Non-toxic. Non-corrosive. Low odor. Suitable for use in occupied spaces. Contains no harmful acids

Will not etch concrete or corrode nearby metals. Will not peel or flake. No need to neutralize

Easy application with low-pressure spray and push broom or microfiber pad

Not for surfaces exposed to standing water

Not for concrete floors polished higher than the equivalent of #200 grit resin bond diamonds. Use Consolideck® GemTone Stains for highly polished interior concrete floors

Must add LS or LS/CS before application

Use LSGuard or Polish Guard for Interior Surfaces

Freshly placed concrete should be at least 21 days old and sufficiently cured to support the appropriate activities before beginning floor preparation and colour application

See TDS for application instructions