Call Us Today: (403) 569-6879

PROSOCO Products

Hardeners & Densifiers

Consolideck Blended Densifier

Consolideck Blended Densifier

Economical Blend Of Silicates For Treatment Of Steel-Troweled & Burnished Concrete Floors
Product Quantity 5 gal
Colours Clear
PH 11.5
Working Time 10-15 Minutes
Dry Time 1 Hour DT
SF Or LF 400-800 SF
Area Or Depth /gal
Floor Or Wall Floors
Interior or Exterior Interior & Exterior
TF Tack Free
RC Recoat
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure
  • Easy, one-step application. No scrubbing. No flushing. No caustic wastewater. Cures quickly

  • Specifically designed for steel- troweled, power-troweled or burnished concrete finishes

  • Penetrates and reacts quickly to produce better initial and ultimate hardness

  • Provides better abrasion resistance than conventional hardeners

  • Can be burnished for a quick sheen

  • Breathable and UV -stable. Will not yellow, discolour, peel or flake

  • VOC- Compliant. Non-flammable. Non-toxic. Low-odour

  • Treated surfaces are easier to maintain

  • May enhance or darken certain substrates

  • Burnish or grind with resins 400-800 grit depending on concrete it is applied to, to remove residue after application

  • 2,000-4,000 SF / UNIT

  • Installation: Using a low pressure sprayer, apply a single saturating coat of Blended Densifier. Apply sufficient material to wet the surface without producing puddles. Use a Consolideck® microfiber pad to spread product evenly and ensure uniform wetting. To avoid overlap marks and streaks, always maintain a wet edge when applying and avoid spreading once drying begins. Scrubbing is not necessary. Surface should remain wet for 10–15 minutes. Adjust rate of application accordingly. Allow treated surfaces to dry at least one hour

  • Ground, Hones or Polished Concrete: Grind with 400 grit resins. For increased hardening, apply a second light application of Blended Densifier. Allow to dry and continue polishing to desired level

  • Burnished Concrete: Once dry, burnish with a high speed machine and diamond impregnated pad (800 grit) to remove residue and enhance the surface. For increased hardening, apply a second application of Blended Densifier and then burnish with a 1500 grit diamond impregnated pad once dry