LabSurface Products
Polyaspratics
LABFAST 2Gal - 85% LO
EpoxyProduct Quantity | 2 gal |
Colours | Clear & Grey |
Working Time | 25 Minutes |
Dry Time | 120 Minutes TF | 120 Minutes RC | 6 Hours DT | 12 Hours FT | 24 Hours LT | 2 Weeks FC |
SF Or LF | 400 SF |
Area Or Depth | 8 mils |
Floor Or Wall | Floors |
Interior or Exterior | Interior & Exterior |
Shore Hardness | D70 |
TF | Tack Free |
RC | Recoat |
FT | Foot Traffic |
LT | Light Traffic |
DT | Dry Through |
FC | Full Cure |
VT | Vehicular Traffic |
FUT | Full Traffic |
-
Faint odour, high solids content, ~85% and 90%, non-yellowing, excellent impact and abrasion resistance
-
Possibility to install base coat and topcoat in a single workday
-
Possible to install two- or three-coat systems, Easy to install due to the very low viscosity of the product
-
Very long recoat window and pot life
-
Excellent chemical and mechanical resistance
-
Impermeability / low moisture sensitivity
-
When used as a protective layer on epoxy, a thickness of 10 mils is recommended
-
Safety Data Sheet | SDS | Part A
Download PDFSafety Data Sheet | SDS | Part B
Download PDFTechnical Data Sheet | TDS
Download PDFVisit LabSurface's website
Visit website