LabSurface Products
Repairs

Epoxy Gel Crack Filler 2:1 Mix
Two-Component Gel Epoxy Crack Repair SystemProduct Quantity | 3 gal |
Colours | Grey & Milky |
Working Time | 30 Minutes |
Dry Time | 2 Hours TF | 24 Hours RC | 60 Minutes EPOXY PRIMER, LABPOX, LABFAST, & LABSHIELD |
SF Or LF | 100 LF |
Area Or Depth | 3/8" x 1/2" /gal |
Floor Or Wall | Floors & Walls |
Interior or Exterior | Interior |
TF | Tack Free |
RC | Recoat |
FT | Foot Traffic |
LT | Light Traffic |
DT | Dry Through |
FC | Full Cure |
VT | Vehicular Traffic |
FUT | Full Traffic |
-
Environmentally friendly, 100% solids, fast curing, low odour, and VOC-free
-
Compatible with LABPOX epoxies as well as LABFAST and LABSHIELD polyaspartics
-
Maintain its thixotropy even during exothermic reaction
-
Easy application with long pot life and working time
-
Potential for LEED eligibility
-
If Crack Filler has sat for 24 hours, must sand prior to applying primer or sealers (must remove all dust as well)
-
Apply only when air and floor temperature is between 10-30oC and the relative humidity less than 85%. If a heated floor is installed, ensure that the system is turned off during application and for the full duration of the cure. The product has been designed to adhere to concrete surfaces. Once the surface has been properly prepared, apply the product with a trowel or a scrapper. The CRACK FILLER EPOXY GEL is a gel designed to be applied in thick layers to fill gaps or holes in concrete floors or walls
-
Safety Data Sheet | SDS | Part A
Download PDFSafety Data Sheet | SDS | Part B
Download PDFTechnical Data Sheet | TDS
Download PDFVisit LabSurface's Website
Visit Website