U.S.Saws Machines
Dust Extraction

Ultra Vac 1250
Heavy Duty VacuumPower | Two 120V Motors |
Motors | A Pair Of Ametek 5.7" Two Stage Motors |
Air Flow | 220 CFM |
Hose | 25 ft. x 2 in. |
Dust Bin | 12.5 gal |
Filter | 12 Pleat Poly-Felt |
Water Lift | 110 in. |
Wet Or Dry | Dry Only |
-
The U.S.Saws Ultra-Vac 1250 is a heavy duty vacuum designed for collecting concrete dust where a 115V Electric power is most convenient
-
The 1250 is the preferred vacuum system for the Mark-3 and Heavy Duty “Dust Buggy” Joint Cleanout Saws, the 5” Hand Held Crack Chasers and the 5” and 7” Hand Held Grinder-Vacs, the TC-7 Stand Up Edger and the VSG-10 Surface Grinder
-
This machine is constructed of an all steel tube frame with a polyethylene body to withstand years of use and abuse. Powered by a pair of Ametek 5.7” Two Stage motors, this vacuum produces 220 CFM. This vac comes with a 25 foot 2” hose. The large 12 pleat poly-felt filter allows continued airflow even when the 12.5 gallon dust bin is near capacity
-
Equipped with enclosed HEPA filter to catch the smallest particles of dust. Complies with OSHA Table 1 regulations
-
Main Filter: Lasts approximately 2-3 years with normal use and maintenance
-
HEPA Filter: Replace every two years or as needed
-
Dust bin is trash bag friendly and is easy to empty
-
Manual filter cleaning
-
Front & rear handles for easy transportation up & down stairs and in & out of vehicles
-
Dust bin is trash bag friendly and is easy to empty
-
Spec Sheet
Download PDFDust Collection Spec Sheet
Download PDFOwner's Manual
Download PDFU.S.Saws Website
Visit Website