Call Us Today: (403) 569-6879

U.S.Saws Machines

Polyurea Pumps

One Man Polymer Pump

Dispense Polyurea & Epoxy Joint Fill Material
Power 115V | 220V (Special Order)
Tanks 6.5 gal Semi-Transparent
Drive Chain & Gear
Weight 170 lbs
Component Ratio 1:1
  • The U.S.SAWS One Man Polymer Pump is designed to dispense Polyurea and Epoxy joint fill material. Most commonly run with a Deep Cycle Battery and inverter or a small generator for cord free operation

  • The new and innovative design of the polymer pump allows one person to control the polymer pump position with one hand while dispensing the joint filler with the other. The joint filling machine is constructed with a “T” handle, allowing left and right-handed operation. This “One Man Pump” enables other workers to handle different tasks while one person is filling concrete expansion joints. The new design also makes it easier for the pump operator as he knows exactly where the pump should be and where it needs to go next — no more running over wet floor joints

  • The strapped-on waste bucket makes those little drips on the floor a thing of the past. The operator holds the mixing tip over the bucket while transporting the pump to get set up for his next run. The storage space also will adequately accommodate a Honda EU1000i generator or a deep cycle battery and inverter for cord-free operation. The 6.5-gallon tanks allow a full 5-gallon bucket of joint filler to be loaded with room to spare. The semi-transparent polyethylene tanks will enable the operator to monitor the fluid level on the fly. They are easy to clean and inexpensive to replace. A new “spill cover” protects the motor and floor from dripped or spilled materials

  • They are no more wiping up spots on the floor of uncured resin with acetone and rags. The joint filling machine is a new, more efficient way to utilize labor while filling expansion joints in concrete floors on large and small projects

  • The polymer pump is backed by U.S.SAWS legendary tech support and customer service and our network of excellent distributors

  • The New Design of this joint fill pump allows for one-person operation

  • The unit comes standard with a 1:1 component ratio, but a 2:1 component ratio is available

  • Lower tanks make filling easier

  • Dedicated storage area for generator or battery

  • Waste bucket holder for fewer drips on the floor

  • Enclosed box for tools storage