Call Us Today: (403) 569-6879

ARDEX Products

Underlayments

ARDEX V 1000™

ARDEX V 1000™

Self-Leveling Underlayment
Product Quantity 50 lbs
Colours Grey
Working Time 10 Minutes
Pot Life 10 Minutes
Dry Time 4-5 Hours FT
SF Or LF 25 SF
Area Or Depth 1/4" Thick
Floor Or Wall Floors
Interior or Exterior Interior
Compressive Strength (PSI) Day28 4400
TF Tack Free
RC Recoat
CG Concrete Guard
CD Concrete Dressing
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure
HFT Heavy Foot Traffic (Forklift)
VT Vehicular Traffic
FUT Full Traffic
  • Installs up to 1 1/4” (3.1 cm) in most applications

  • Install moisture-insensitive tile and stone after 6 hours, floor coverings (Carpet, vinyl sheet, vinyl tile, vinyl plank, rubber, linoleum):after 24 hours

  • Pourable/pumpable

  • Application Max. Thickness:

  • Over ARDEX VR 98: 1/4” (6 mm)

  • Over substrates primed with ARDEX P 82 or ARDEX P 4: 1/2” (12 mm)

  • All other applications 1 1/4” (3.1 cm)

  • Suitable Substrates: Concrete (structurally sound); Absorbent terrazzo on concrete†; Properly installed ARDEX moisture control systems on concrete: ARDEX MC™ RAPID, ARDEX PU 50™, ARDEX VR 98™; Other approved, non-porous materials on concrete†: Non-porous (non-absorbent) cementitious terrazzo, Ceramic, quarry or porcelain tiles, Epoxy coatings, Epoxy terrazzo, Non-water-soluble adhesive residue, Concrete treated with certain curing compounds; Must be sound, solid and well-bonded to underlying, structurally sound substrates

  • Recommended Tools: ARDEX T-1 Mixing Paddle • ARDEX T-10 Mixing Drum • 1/2” (12 mm) heavy-duty drill (min. 650 rpm) • appropriate measuring bucket • ARDEX T-4 Spreader • ARDEX T-5 Smoother • ARDEX T-6 Spiked Roller • cleated athletic shoes with non-metallic spikes

  • Pour the mix onto the floor. Spread with spreader. Immediately smooth the material with the smoother, or spike roll the material with the spiked roller. Work in a continuous manner during the entire self-leveling installation. Wear cleated athletic shoes with non-metallic spikes to avoid leaving marks in the liquid