Call Us Today: (403) 569-6879

ARDEX Products




Tilt Wall Patch and Finishing Compound for Vertical Concrete Walls
Product Quantity 10 lbs
Colours Grey
Working Time 15-20 Minutes
Pot Life 15-20 Minutes
Dry Time 15-60 Minutes Seal Or Paint
SF Or LF 33.3 SF
Area Or Depth 1/8" Thick
Floor Or Wall Walls
Interior or Exterior Interior & Exterior
TF Tack Free
RC Recoat
CG Concrete Guard
CD Concrete Dressing
FT Foot Traffic
LT Light Traffic
DT Dry Through
FC Full Cure
HFT Heavy Foot Traffic (Forklift)
VT Vehicular Traffic
FUT Full Traffic
  • Ideal for filling in surface defects such as spalls, gouges, cracks, dents, chips, bug holes or honeycombs – any type, size or shape of surface defect that needs to be filled and smoothed before coating. ARDEX TWP hardens quickly and dries fast without shrinking, cracking or spalling

  • Concrete or masonry surfaces

  • Easy to mix and apply

  • 100-150 SF: SKIM COAT

  • Recommended Tools: Mixing bucket, margin trowel, steel trowel, rubber float, sponge, ARDEX T-2 Ring Mixing Paddle and a 1/2” heavy-duty drill (min. 650 rpm)

  • After mixing, apply the compound to the prepared surface with a steel trowel. Apply sufficient pressure to fill in all surface defects. Where necessary, minor touch-up work can be accomplished using a rubber float or slightly dampened sponge once the surface has started to harden. If the material has already fully set, the surface can be smoothed with fine sandpaper or re-skimmed

  • No compressive strength or tensile strength information for this product because it is unsanded and non-structural