ARDEX Products
Toppings

ARDEX PC-T™ Light Grey
Polished Concrete ToppingProduct Quantity | 50 lbs |
Colours | Light Grey |
Working Time | 10 Minutes |
Pot Life | 10 Minutes |
Dry Time | 2-3 Hours Walkable |
SF Or LF | 12.5 SF |
Area Or Depth | 1/2" Thick |
Floor Or Wall | Floors |
Interior or Exterior | Interior |
TF | Tack Free |
RC | Recoat |
CG | Concrete Guard |
CD | Concrete Dressing |
FT | Foot Traffic |
LT | Light Traffic |
DT | Dry Through |
FC | Full Cure |
HFT | Heavy Foot Traffic (Forklift) |
VT | Vehicular Traffic |
FUT | Full Traffic |
-
ARDEX PC-T™ Polished Concrete Topping is a self-drying, self-leveling blend of Portland cements and other hydraulic cements for creating polished concrete floors. ARDEX PC-T installs from 3/8” - 2” (9 mm - 5 cm) neat and up to 5” (13 cm) with the addition of aggregate. ARDEX PC-T hardens fast due to its unique self-drying formulation – it can be polished in as little as 24 hours. Use ARDEX PC-T to provide a hard, flat, smooth surface that can be polished. ARDEX PC-T is ideal in areas such as retail stores, schools, warehouses and all interiors where a polished concrete surface is desired
-
Install from 3/8” (9 mm) up to 2” (5 cm) neat and up to 5” (13 cm) with aggregate
-
Smooth new or existing concrete and certain non-porous surfaces
-
ARDEX PC-T is not recommended for use in commercial kitchens, bathrooms, exterior spaces, heavy commercial projects such as sports arenas and shopping mall common areas, industrial projects with constant fork-lift traffic or any environment with chemical staining agents or potential long-term water exposure
-
Recommended Tools: ARDEX T-1 Mixing Paddle; ARDEX T-10 Mixing Drum; ARDEX T-4 Spreader; ARDEX T-5 Smoother; ARDEX MB-5.0 Measuring Bucket; 1/2” (12 mm) heavy-duty drill (min. 650 rpm) and baseball or soccer shoes with non-metallic cleats
-
MANUALLY: ARDEX PC-T is mixed two bags at a time. Mix each 50 lb. (22.7 kg) bag with 5 quarts (4.73 L) of clean water. Pour the water in the mixing drum first, and then add each bag of ARDEX PC-T while mixing with an ARDEX T-1 Paddle and a 1/2” (12 mm) heavy-duty drill (min. 650 rpm). Mix thoroughly for approximately 2 - 3 minutes to obtain a lump-free mix. Do not overwater! Yellowish foam while mixing or settling of the sand aggregate while placing indicates overwatering
-
PUMPING: Pour the mix onto the substrate and spread with the ARDEX T-4 Spreader. Immediately smooth the material with the ARDEX T-5 Smoother. Wear baseball or soccer shoes with non-metallic cleats to avoid leaving marks in the liquid ARDEX PC-T
-
Safety Data Sheet | SDS
Download PDFTechnical Data Sheet | TDS
Download PDFVisit Ardex's Website
Visit Website