ARDEX Products
Primers & Joint Fillers
ARDEX P 82™
Ultra PrimeProduct Quantity | 1 gal |
Colours | Pink & White |
Working Time | 60 Minutes |
Pot Life | 60 Minutes |
Dry Time | 3 Hours Minimum, 24 Hours Maximum DT |
SF Or LF | 300-400 SF | 400-500 SF | 500-600 SF |
Area Or Depth | Over Wood | Over Concrete, Ceramic, Quarry & Porcelain Tiles | Over Epoxy & Other Smooth Non-Porous Surfaces |
Floor Or Wall | Floors |
Interior or Exterior | Interior & Exterior |
TF | Tack Free |
RC | Recoat |
CG | Concrete Guard |
CD | Concrete Dressing |
FT | Foot Traffic |
LT | Light Traffic |
DT | Dry Through |
FC | Full Cure |
HFT | Heavy Foot Traffic (Forklift) |
VT | Vehicular Traffic |
FUT | Full Traffic |
-
A high-strength, solvent-free primer for the installation of ARDEX underlayments over smooth, non-absorbent substrates, such as ceramic, quarry and porcelain tile, terrazzo and metal decking, as well as wood subfloors and non-water-soluble adhesive residues on concrete. Absorbent concrete and other substrates in certain, specialized applications should not be primed with ARDEX P 82™
-
For the installation of ARDEX underlayments over non-porous, wood and metal substrates and adhesive residue on concrete
-
Waterborne, two-component primer
-
For the installation of ARDEX underlayments over non-porous, wood and metal substrates and adhesive residue on concrete (Absorbent concrete and other substrates in certain, specialized applications should not be primed with ARDEX P 82™)
-
INSTALLATION GUIDELINES: ARDEX P 82™ is supplied as a two-component unit that consists of two 1/2-gallon containers: Part A (liquid is red in colour) and Part B (liquid is white in colour). Mix the entire contents of ARDEX P 82™ Part A with ARDEX P 82™ Part B using a mixing paddle. Apply to the substrate with a foam squeegee or a short-nap or sponge paint roller. The coat of primer should be very thin while maintaining 100% coverage. Do not leave any bare spots. Back roll with a dry roller to remove excess primer. Allow primer to dry to a thin, slightly tacky film (min. 3 hours, max. 24 hours). ARDEX P 82™ must be applied in a very thin layer within one hour of mixing
-
Safety Data Sheet | SDS | Resin
Download PDFSafety Data Sheet | SDS | Hardener
Download PDFTechnical Data Sheet | TDS
Download PDFVisit Ardex's Website
Visit Website